DOCK AND DOOR TECHNICIAN
Company: Raymond West
Location: Auburn
Posted on: November 15, 2024
Job Description:
Raymond West is looking for a Dock and Door Technician to join
our service team! The primary objectives of the Dock and Door
Technician are (1) the proficient repair and service of the
customer's equipment, (2) to maintain good communication and
working relationships with customers, peers, and management, (3) to
represent and sell the entire company, (4) to be profitable with
direct labor billing, (5) work within all safety guidelines
established by Raymond West and OSHA.
Raymond West is committed to providing our customers with
end-to-end warehouse solutions. We bring you our industry-leading
expertise in lift trucks, racking, conveyor, dock and door,
rentals, parts, and service. Our customers trust us to provide the
right supply chain solutions and services to keep their business up
and running.
Duties and Responsibilities:
Primary duties and responsibilities will vary with the specific
position. Typical responsibilities are listed below. This list is
not inclusive.
- Repair all types of Dock and Door equipment that RW sells and
services.
- Repair all types of equipment that Raymond West sells and
services.
- Update training and skills on a continuing basis.
- Train other employees as needed.
- Maintain a profitable billing level.
- Follow all Service Department procedures.
- Communicate with assigned Service leadership.
- Complete all paperwork transactions in a timely, neat, accurate
and orderly fashion.
- Communicate all options to customers before proceeding with
work.
- Have the necessary tools to perform repair and scheduled
service work.
- Complete jobs within quoted time limits when applicable.
- Maintain a clean and orderly (inside and outside) vehicle.
- Maintain an accurate assigned parts inventory, if
applicable.
- Represent the entire company at all times.
- Pass Raymond Certification and re-certification if
applicable.
- Maintain good working knowledge of customers and equipment in
assigned areas.
- Maintain an acceptable driving record as established by the
company's insurance carrier.
- Report accidents whether self or customer.
- Account for 100% of available time during working hours.
- Must be willing to work overtime when necessary.
- Must coordinate all overtime with assigned supervisor.
- Must follow all procedures in the company's Employee
Handbook.
- Must follow safety procedures and use good judgment in regard
to safety.
- Must be willing to work out of town as necessary.
- Establish a positive rapport with customers.
- Perform other specific duties and projects as assigned by the
Service Supervisors or Managers. Required Skills/Abilities:
- Excellent written and verbal communication skills
- Excellent Organizational Time Management skills
- Proficient in Microsoft office Suite and similar software
- Ability to read and interpret documents such as safety rules,
operating and maintenance instructions, and procedure manuals.
- Ability to speak effectively before groups of customers or
employees of an organization.
- Must be able to maintain effective working relationships with
employees, Co-workers, and Managers in other departments.
- Must be willing to work off-hours as specific needs dictate and
willing to assume more responsibility as required.
- Must be able to fulfill essential job functions in a consistent
state of alertness and safe manner.
- Must be self-motivated and able to manage time
efficiently.
- Must be customer oriented.
- Able to always exhibit professional behavior.
- Willing to follow mandates and procedures of the Service
Department.
- Ability to deal with customers on a face-to-face basis.
- Maintain a sound working relationship with other technicians
and fellow workers.
- Must pass all available certificates appropriate to the
position.
- Must have working knowledge of basic D.C. electricity, basic
A.C. electricity, internal combustion, and diesel engines.
- Ability to write routine reports and correspondence.
- Ability to add, subtract, multiply and divide in all units of
measure, using whole numbers, common fractions, and decimals.
- Ability to apply common sense understanding to carry out
instructions furnished in written, oral or diagram form.
- Raymond Level 1 Certified or working towards that goal, if
applicable.
- Must possess a valid driver's license with no more than the
allowable level of points on record, if applicable.
- Maintain personally owned tools according to approved minimum
tool list.
- Maintain additional tools as required by duties and
certification level.
- Must be able to take directions.
- Must be a team player, i.e., to work with peers.
- Must have working knowledge of hydraulic systems.
- Must have mechanical abilities.
- Must maintain a clean, neat, and professional appearance.
- Willing and able to learn quickly and perform accurately and
neatly with a degree of flexibility.
- Must be motivated to continuous self-development and
training.
- Willing to assume more responsibility as required.
Education/Experience:
Minimum Education and Experience: Determined by position.
- High school diploma, general education degree (GED) or
equivalent.
- Minimum of 3 years breakdown experience or comparable service
experience; or equivalent combination of education and experience.
Travel Requirement:
- This position will be based in the field and require daily
travel within assigned territories.
- Technicians will be provided a company vehicle and a company
Fuel Card to pay for vehicle expenses.
- Must be able to be insured by Raymond West. Physical
Requirements:
The work environment characteristics described here are
representative of those an employee encounters while performing the
essential functions of this job. Reasonable accommodations may be
made to enable individuals with disabilities to perform the
essential functions.
- Position is non-sedentary.
- Specific vision abilities required by this job include close
vision, distance vision, color vision, peripheral vision, depth
perception, and ability to adjust focus.
- The employee is regularly exposed to moving mechanical
parts.
- Position will be required to go onto job sites to perform
duties where construction is underway.
- The employee must frequently lift and/or move up to 50 pounds
and the ability to maneuver up to 125 lbs. with assistance of
equipment or other team members.
- The position will require employees to use hands to finger,
handle, or feel and reach with hands and arms.
- The employee is occasionally required to smell.
- Position requires the employee to
climb/balance/stoop/kneel/crouch and crawl.
- The employee is frequently exposed to outside weather
conditions and the risk of electrical shock.
- The employee is occasionally exposed to wet and/or humid
conditions; high, precarious places; fumes or airborne particles;
toxic or caustic chemicals; extreme cold; extreme heat; and
vibration.
- The noise level in the work environment is sometimes loud. Pay
Range:
- The hourly range for this position is $20.00 - $40.00. The
specific pay offered to a candidate may be influenced by a variety
of factors including but not limited to the candidate's relevant
experience, education, and work location.
Qualified candidates must be able to pass a pre-employment physical
and drug screen.
Raymond West provides medical, dental, vision, 401k with company
match, flexible spending accounts, disability insurance, life
insurance, personal time off, holiday pay and a great team to work
with!
Check us out at www.raymondwest.com. Raymond West has a great group
of loyal and hardworking employees who help us maintain our
exemplary level of sales and service.
Apply on-line via the submit resume button provided. We are an
equal opportunity employer and encourage all qualified persons to
apply. We encourage qualified military veterans and persons with
disabilities to submit their resume online. We will consider
qualified applicants with criminal histories in accordance with the
FCO. We are a drug free company.
This contractor and subcontractor shall abide by the requirements
of 41 CFR - - 60-1.4(a), 60-300.5(a) and 60-741.5(a). These
regulations prohibit discrimination against qualified individuals
based on their status as protected veterans or individuals with
disabilities and prohibit discrimination against all individuals
based on their race, color, religion, sex, or national origin.
Moreover, these regulations require that covered prime contractors
and subcontractors take affirmative action to employ and advance in
employment individuals without regard to race, color, religion,
sex, national origin, protected veteran status or disability.
Keywords: Raymond West, Bellevue , DOCK AND DOOR TECHNICIAN, Engineering , Auburn, Washington
Didn't find what you're looking for? Search again!
Loading more jobs...